Auteur: ram on
Date: 10-06-2009 17:31
Bonjour,
0040 c'est:
Pump motor operation count
reaches the limit
How to clear?
Perform Maintenance Mode 2 [CLEAR COUNTERS / CLEANER
D'après ce que je vois, sur le manuel de maintenance que je me suis procuré sur le net, mais je ne sais pas où, ( via le yahoo groups epson ), il semble que ça apparaisse vers
8000 pages.
Pour effacer cette information de conteur: il faut aller en mode maintenance 2:
dans le menu Counter initialize menu :"CLEAR COUNTERS,"
Choisir "Cleaner"
1.4.5 Maintenance Mode 2:
OUTLINE
Startup
The maintenance mode 2 is selected by switching power ON while pushing the
Paper source, Cut/Eject, and Paper Feed ∇ buttons.
Operation
1. The setting menu select mode is selected after power ON.
2. Each setting menu is displayed one after another by pressing Paper Feed Δ∇
buttons in the setting menu select mode. It is shifted to setting item select
menu by pressing the SelecType button.
[Setting menu] is displayed on the upper line, and [Setting item] is displayed
on the lower line.
3. The setting menu is displayed one after another by pressing Paper Feed Δ∇
buttons in the setting item select mode. It is shifted to setting value select
mode of the setting item by pressing the SelecType button. [Setting item] is
displayed on the upper line, and [Setting value] is displayed on the lower line.
The '*' represents the current setup value.
4. Setting value is displayed on the lower line one after another by pressing
Paper Feed Δ∇ buttons in the setting value select mode if the setting value can
be changed. The '*' represents the current setup value.
5. When the Enter button is pressed in the setting value select mode, the
displayed setting value is entered as the current setting value. If it has a
corresponded operation, it is started. No operation occurs if '*' is already
displayed.
6. It returns to the setting item select menu by pressing the Paper Source button
in the setting value select mode. It returns to the setting menu select mode by
pressing the Paper Source button in the setting item select menu.
Termination
Switch power OFF > ON.
Panel display
Character strings on the second line in “Panel message translation” are displayed
on the second line of LCD panel. Setup values are displayed on the second line of
LCD panel.
Pour choisir la langue:
Mode Maintenance qui permet de selectionner la langue:
Verifiez que l'imprimante est hors tension:
En maintenant la touche PAUSE enfoncée, appuyez sur POWER pour mettre l'imprimante sous tension.
Le message MODE MAINTENANCE s'affiche
le 2ème menu est celui de la langue.
( ca s'est tiré du guide de référence donné avec les imrimantes 7600 et 9600
L'extrait plus haut est tiré du manuel de maintenance, pdf qui fait 18 mo
J'espère que vous pourrez avancer!
|
|